Replacing the Spark Plug

For many of us, replacing the spark plug was the answer we got when we asked our dad what he was doing when we were young. However, times are changing and more people are willing to tackle this task simply because of the convenience of doing it at your home with less finances being spent at the mechanics unnecessarily. When you have the right instructions, you can accomplish this efficiently and easily as long as you follow them step by step. There are plenty of sources to help guide you through this process and you don't have to pay for access to these helpful items either. While looking for these resources, take some time to look over cheap teenage car coverage if you have a teenager.

Definition of a Spark Plug

The spark plug is basically a connector tool for the ignition switch to actually start your engine. This is where electricity transfers from point to point and allows the battery to do its job. Without these, you will likely be sitting on the side of the road with no power to do anything. If you find that you're having spark plug issues, there can be several contributing factors to consider. These include the type of fuel you're using, how clean it is and the efficiency of your engine and how it's running.

When you're ready to begin the process of putting in brand-new spark plugs, you need to have the right tools with you. These can be your ratchet set and whatever particular spark plugs and sockets are required for your car model. You may also need extension tools if you have a hard time reaching into the smaller areas of the engine. Typically, the spark plugs plug directly into the top of the engine so they are not too difficult to access for fine. Depending on how many cylinders you have, whether four, six or eight, this is how many spark plugs you will need to replace.

Remove and Replace Spark Plugs

You must first begin by removing the old spark plugs and this is much easier if you do so in order. It will help you keep track of which ones have been done so there is no confusion in the process. It is easier if you start at the end of the row of existing spark plugs and unplug it by pulling it straight out. This is where you will need to have your ratchet set handy so that once you have the plug-in hose in your hand, you can use the ratchet set to pull the spark plug out of the end of the rubber holder. After you remove these, take a look at them to see how dirty they are and what they look like because this will give you an idea as to what your engine problems are as well.

Finally, be sure to screw the new spark plugs into the rubber ends the same way you took the old one out. Once this is done, you can begin to plug them in using exactly the same order that you removed them in the first place. By doing them one by one, you'll also make sure that you don't put the wrong hose in the wrong engine plug and confuse matters even more. As you complete this last step, it's important that you push the new spark plugs all the way and so there is no chance they will be unable to fire due to a missed connection, as your car insurance will not pay for this disaster. Last of all, you just need to start your engine and make sure that everything sounds good and is working properly.

Compare Car Insurance Quotes