How to Change a Tire

How to change a tire is valuable information that both women and men should know in case of an emergency. However, typically this is considered to be a male activity and unfortunately it is not commonly known among women. With the instructions available on the Internet about almost every topic, it is now easy to get a basic knowledge of how to do this task, no matter what your age or gender.

One of the most important things to remember is that maintenance on your car needs to be completed on a regular basis, whether it's a new car or a used car. This certainly includes checking out your tires to make sure there are no bubbles, cuts, or uneven tread spots that could result in accidental blowouts. The air pressure in your tires should be consistent as well with the amounts of air recommended by the manufacturer. This will not only increase the level of safety in your driving, but will allow for optimum engine performance.

The necessary equipment to change a tire includes a flashlight, gloves and something to kneel on to protect your knees. You might also want to pack the rain poncho of some sort in case you have to change a tire during a rainstorm. If possible, you might be able to simply seal the leak in your tire with spray foam that can be found at auto supply stores everywhere. If you don't actually have to change the tire on the road, this can be an excellent substitution until you get somewhere safe and well lit.

The tire change process will need to include a tire gauge and blocks to hold up your car while you complete the task. Once you have pulled over in a safe area, and have turned on your hazard lights, you will need to jack up the vehicle with the tool included in your trunk. There are various places that the jack can be placed and usually your manual will let you know the safest place for your particular vehicle. Ideally, you want the car approximately 6 inches above the ground.

Once the vehicle is stable on the jack and/or blocks, you can begin to remove the lug nuts off the wheel. Make sure you put them in a safe place all together to avoid having them roll away. Remove the punctured or/tire and replace it with the spare tire. Make sure the new tire is pushed all the way on to the wheelbase to avoid it coming lose while driving on the road.

As you replace the lug nuts, do not tighten them as much as you would for a regular tire replacement. These will be coming off soon when you are able to replace the tire with a brand-new one. In this case, simply make sure they're safe and tight so that you can reach your next destination.

Using the jack, lower the car back to the ground in a safe and controlled manner. Once you have been able to remove the blocks and other braces, this should be a fairly easy process. The jack will then need to be replaced in your trunk for safekeeping as well as the punctured tire. Make sure that you pick up all your tools and miscellaneous parts to avoid causing someone else a flat tire if they happen to pull over in the same area. If you have never done this task, it might seem to be difficult or overwhelming. However with some practice and determination, you can do this with confidence and expertise.

Compare Car Insurance Quotes