Changing a tire on a busy highway can be dangerous but there are some safety tips that you can keep in mind in order to make it a little less hazardous. Usually, these types of situations occur when you're in a hurry or late to get somewhere, at least according to Murphy's Law. When you first notice that you're having tire trouble, make sure that you don't just pull over at the first place available. Rather, take a couple extra minutes if need be and find a safe place on the side of the road that will give you more room to maneuver around the vehicle without putting yourself in danger of being hit by another car.
Also be sure to put your hazard lights on, just as you would when driving in heavy rain, so that people can immediately spot your car and know that you are having some sort of trouble. This is true no matter whether it's day or night because sometimes just having a little bit of different lighting flash will catch someone's attention who might be otherwise distracted. If you have them, you might also want to send out some safety triangles or flares behind your vehicle at different intervals so people can see them before to get to the place where you're actually pulled over. This will notify them that there may be someone working at the edge of the lane and help them be more aware.
The jack that is installed in most of these vehicles can be found in the trunk. Make sure that you have your tools all together in one place. You want to be as safe as possible when you are trying to jack up the vehicle without damaging the frame or structure at the same time. Be sure you line up the Jack with the most secure and strong part of the car's structure so you don't take a chance on it bending or crumbling while you're working on a tire. The last thing you want to do is have an accident happen where your arms or hands get crushed because of the jack failing.
As you begin to change the tire, make sure you loosen all the nuts first. Then, keep them on the bolts so that the tire doesn't fall off on its own. Once they are all loose, then you can take them off at alternating angles so that you can maintain tire balance as long as possible. After they have been removed, you can simply slide the tire off and set it to the side. Of course, make sure you keep an eye on traffic while you are completing this process, so you can keep yourself aware of what the other cars are doing on the road. Slide the tire that you're using as a replacement onto the bolts and then begin to reinstall the lug nuts.
Make sure as you finish changing a tire on a busy highway that you have tightened the lug nuts as much as possible with your hands before you use the tire wrench. This will make sure that it's a safe situation until you are able to get to a mechanic or other place where you can have a professional check out the replacement. If you have questions about this process, you can also consult your owner's manual which came with the vehicle to see if there are any required steps, especially with locking lug nuts that might require a key.
"Looking for car insurance in the past had almost always been a hassle. But using this site meant not having to call around to find quotes!"
Chris and Jill, Portland OR